QUALITY

DESAPRO designs and manufactures the highest quality aluminum cases in the transit/transport case industry.  We fully understand the performance capabilities of our product and we strive to achieve customer confidence in our abilities in order that we may solve customer requirements while exceeding customer expectations.

Quality Inspection

Inspection Lines:

  • Qualification Screening
  • Incoming Materials
  • In-process
  • Pre-paint / Powder Coat / MIL-DTL-5541 Coating
  • Post-Paint
  • Post-Manufacturing

SN EN ISO 9001 : 2008 Certification

Quality Testing Center

MIL-STD-810 Capabilities:

  • Blowing Rain
  • Blowing Sand
  • Long Duration Shock
  • Transit Drop
  • Thermal Testing
  • Water Submersion
  • Material Tensile Testing

MIL-STD-810 rugged design capable of meeting the following requirements:

  • Blowing Rain, Method 506.4, Procedure I & 2
  • Blowing Dust, Method 510.4, Procedure I
  • Blowing Sand, Method 510.4, Procedure II
  • Composite Wheel Vehicle Vibration – Full-Intensity Exposures,120 minutes per axis;
  • Dust Settling Sand, Method 510.4, Procedure II
  • EMI, MIL-STD-461
  • Fungus, Method 508.5: 28 days
  • High Temperature Storage, Method 501.4, Procedure I (Table 501.4-II, Induced Conditions) and storage at 176°F
  • Humidity, Method 507.4; 5-48 hour cycles
  • Low temperature storage, Method 502.4, Procedure I for storage with temperatures down to -65°F
  • Low Temperature Operational, Method 502.4, Procedure II operating down to -65°F
  • Mechanical/Functional Shock, Procedure V, Figure 516.5, Test Procedure I
  • Minimum Integrity Exposure, Exposures, Figure 514.5C-17
  • Operational at altitudes up to 15,000 feet, Method 500.4, Procedure II with temperatures up to 122°F
  • Salt Fog, Method 509.4, held for 96 hours in salt fog atmosphere with 5% NaCl and a ph-factor of 6.5-7.2
  • Storage / Transport at altitudes up to 50,000 feet, Method 500.4, Procedure I for transportation in an unpressurized cabin
  • Temperature Shock, Method 503.4, held for 4 hours at 185°F, temperature lowered within 5 minutes to -40°F and held for 4 hours, then raised within 5 minutes to 185°F; 3 cycles with satisfactory test at room temperature
  • Transit Drop, Method 516.5, Procedure IV (Drop height of 24inches), Unit operates after each drop
Custom Design Quote

Contact Debra Langelier, National Sales Manager, to get started with a custom design quote.

Your Name (required)

Your Email (required)

Subject (required)

Your Message (required)

National Sales Manager

Email: DLangelier@desapro.com
Office: 801-999-4763
Mobile: 480-347-6313

x